Evaluation of the Effect of Conductive Nanoparticles MXene, ITO, and CNTs on Enhancing the Performance of a Three-Dimensional Electrochemical Reactor for Congo Red Dye Removal from Industrial Wastewater

Authors

  • Fateme Najafi Kalyani Master's Degree in Environmental Engineering, Faculty of Natural Resources, Islamic Azad University, Bandar Abbas Branch, Iran

DOI:

https://doi.org/10.63053/ijhes.130

Keywords:

Conductive nanomaterials, Three-dimensional electrochemical reactor, Congo Red dye, Electrochemical oxidation, Nanotechnology in water treatment

Abstract

The presence of resistant dyes such as Congo Red in industrial wastewater, particularly from the textile industry, poses serious challenges for both environmental safety and treatment processes. Among various treatment methods, three-dimensional electrochemical systems have gained increasing attention due to their unique structure and high oxidation capacity. One promising approach to enhancing the efficiency of these systems is the incorporation of conductive nanoparticles, which can improve electron transfer, increase active surface area, and facilitate the generation of reactive species. This review compiles and analyzes findings from previous studies regarding the use of three widely studied conductive nanomaterials MXene, ITO, and CNTs in these systems. The focus is placed on their structural properties, influential operational parameters, and reported outcomes in the removal of Congo Red dye. The synthesis of existing research suggests that appropriate selection of nanomaterials and operating conditions plays a critical role in improving the performance of three-dimensional electrochemical systems for the treatment of dye-containing industrial wastewater.

References

de Campos Ventura-Camargo B, Marin-Morales MA. Azo dyes: characterization and toxicity-a review. Textiles and Light Industrial Science and Technology. 2013;2(2):85-103.

Chung K-T. Azo dyes and human health: A review. Journal of Environmental Science and Health, Part C. 2016;34(4):233-61.

Rivera FF, Pérez T, Castañeda LF, Nava JL. Mathematical modeling and simulation of electrochemical reactors: A critical review. Chemical engineering science. 2021;239:116622.

Jadhav P, Muhammad N, Bhuyar P, Krishnan S, Abd Razak AS, Zularisam A, et al. A review on the impact of conductive nanoparticles (CNPs) in anaerobic digestion: Applications and limitations. Environmental Technology & Innovation. 2021;23:101526.

Kumar SS, Ghosh P, Kataria N, Kumar D, Thakur S, Pathania D, et al. The role of conductive nanoparticles in anaerobic digestion: Mechanism, current status and future perspectives. Chemosphere. 2021;280:130601.

El-Mas SM, Hassaan MA, El-Subruiti GM, Eltaweil AS, El Nemr A. Microwave-induced degradation of Congo red dye in the presence of 2D Ti3C2Tx MXene as a catalyst. Scientific Reports. 2025;15(1):634.

Taube H. Mechanisms of redox reactions of simple chemistry. Advances in inorganic chemistry and radiochemistry. 1: Elsevier; 1959. p. 1-53.

Qi L, Xu H, Tang R, Liu L, Chen Y, Wen Q. Study on power generation and Congo red decolorization of 3D conductive PPy-CNT hydrogel in bioelectrochemical system. International Journal of Hydrogen Energy. 2022;47(37):16568-79.

Liu J, Ren N, Qu C, Lu S, Xiang Y, Liang D. Recent advances in the reactor design for industrial wastewater treatment by electro-oxidation process. Water. 2022;14(22):3711.

Malwal D, Gopinath P. Enhanced photocatalytic activity of hierarchical three dimensional metal oxide@ CuO nanostructures towards the degradation of Congo red dye under solar radiation. Catalysis Science & Technology. 2016;6(12):4458-72.

Ohanele E, Oguzie K, Ezema F, Oguzie E. Lead Oxide Modified Graphite Electrodes for Electrochemical Degradation of Congo Red Dye in Aqueous Solution. Periodica Polytechnica Chemical Engineering. 2024;68(4):541-51.

Potes‐Lesoinne HA, Ramirez‐Alvarez F, Perez‐Gonzalez VH, Martinez‐Chapa SO, Gallo‐Villanueva RC. Nanomaterials for electrochemical detection of pollutants in water: A review. Electrophoresis. 2022;43(1-2):249-62.

Eivazzadeh-Keihan R, Noruzi EB, Chidar E, Jafari M, Davoodi F, Kashtiaray A, et al. Applications of carbon-based conductive nanomaterials in biosensors. Chemical Engineering Journal. 2022;442:136183.

Tiwari JN, Tiwari RN, Kim KS. Zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanostructured materials for advanced electrochemical energy devices. Progress in Materials Science. 2012;57(4):724-803.

Wang H, Yuan X, Zeng G, Wu Y, Liu Y, Jiang Q, et al. Three dimensional graphene based materials: Synthesis and applications from energy storage and conversion to electrochemical sensor and environmental remediation. Advances in colloid and interface science. 2015;221:41-59.

Sun L, Mo Y, Zhang L. A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects. Chemosphere. 2022;294:133801.

Mehmandoust M, Erk N, Karaman O, Karimi F, Bijad M, Karaman C. Three-dimensional porous reduced graphene oxide decorated with carbon quantum dots and platinum nanoparticles for highly selective determination of azo dye compound tartrazine. Food and Chemical Toxicology. 2021;158:112698.

Liu S, Feng X, Gu F, Li X, Wang Y. Sequential reduction/oxidation of azo dyes in a three-dimensional biofilm electrode reactor. Chemosphere. 2017;186:287-94.

Suganthi S, Ahmad K, Oh TH. Progress in MXenes and Their Composites as Electrode Materials for Electrochemical Sensing and Dye-Sensitized Solar Cells. Molecules. 2024;29(22):5233.

Bilal M, Khan U, Ihsanullah I. MXenes: The emerging adsorbents for the removal of dyes from water. Journal of Molecular Liquids. 2023;385:122377.

Velusamy K, Chellam P, Kumar PS, Venkatachalam J, Periyasamy S, Saravanan R. Functionalization of MXene-based nanomaterials for the treatment of micropollutants in aquatic system: A review. Environmental Pollution. 2022;301:119034.

Shankar V, Dharani S, Ravi A, SaravanaVadivu A. A concise review: MXene-based photo catalytic and photo electrochemical water splitting reactions for the production of hydrogen. International Journal of Hydrogen Energy. 2023;48(57):21654-73.

Li X, Huang Z, Shuck CE, Liang G, Gogotsi Y, Zhi C. MXene chemistry, electrochemistry and energy storage applications. Nature Reviews Chemistry. 2022;6(6):389-404.

Salim O, Mahmoud K, Pant K, Joshi R. Introduction to MXenes: synthesis and characteristics. Materials Today Chemistry. 2019;14:100191.

Zhang L, Song W, Liu H, Ding H, Yan Y, Chen R. Influencing factors on synthesis and properties of MXene: a review. Processes. 2022;10(9):1744.

Armstrong NR, Lin AW, Fujihira M, Kuwana T. Electrochemical and surface characteristics of tin oxide and indium oxide electrodes. Analytical Chemistry. 1976;48(4):741-50.

Li Y, Liu Z, Li Q, Liu Z, Zeng L. Recovery of indium from used indium–tin oxide (ITO) targets. Hydrometallurgy. 2011;105(3-4):207-12.

Spada E, De Paula F, Cid CP, Candiotto G, Faria RM, Sartorelli M. Role of acidic and basic electrolytes on the structure and morphology of cathodically reduced indium tin oxide (ITO) substrates. Electrochimica Acta. 2013;108:520-4.

Ghamari F, Raoufi D, Arjomandi J. Influence of thickness on crystallographic, stereometric, optoelectronic, and electrochemical characteristics of electron-beam deposited indium tin oxide thin films. Materials Chemistry and Physics. 2021;260:124051.

Brumbach M, Veneman PA, Marrikar FS, Schulmeyer T, Simmonds A, Xia W, et al. Surface composition and electrical and electrochemical properties of freshly deposited and acid-etched indium tin oxide electrodes. Langmuir. 2007;23(22):11089-99.

Gupta VK, Kumar R, Nayak A, Saleh TA, Barakat M. Adsorptive removal of dyes from aqueous solution onto carbon nanotubes: a review. Advances in colloid and interface science. 2013;193:24-34.

Khan FSA, Mubarak NM, Tan YH, Khalid M, Karri RR, Walvekar R, et al. A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes. Journal of Hazardous Materials. 2021;413:125375.

Mallakpour S, Rashidimoghadam S. Carbon nanotubes for dyes removal. Composite nanoadsorbents: Elsevier; 2019. p. 211-43.

Mashkoor F, Nasar A, Inamuddin. Carbon nanotube-based adsorbents for the removal of dyes from waters: a review. Environmental Chemistry Letters. 2020;18(3):605-29.

Ali MH, Goher ME, Al-Afify AD, El-Sayed SM. A facile method for synthesis rGO/Ag nanocomposite and its uses for enhancing photocatalytic degradation of Congo red dye. SN Applied Sciences. 2022;4(10):276.

Cao W, Nie J, Cao Y, Gao C, Wang M, Wang W, et al. A review of how to improve Ti3C2Tx MXene stability. Chemical Engineering Journal. 2024:154097.

Jun B-M, Han J, Park CM, Yoon Y. Ultrasonic degradation of selected dyes using Ti3C2Tx MXene as a sonocatalyst. Ultrasonics Sonochemistry. 2020;64:104993.

Jiang J, Bai S, Zou J, Liu S, Hsu J-P, Li N, et al. Improving stability of MXenes. Nano Research. 2022;15(7):6551-67.

Aydın EB, Sezgintürk MK. Indium tin oxide (ITO): A promising material in biosensing technology. TrAC Trends in Analytical Chemistry. 2017;97:309-15.

Ali N, Said A, Ali F, Raziq F, Ali Z, Bilal M, et al. Photocatalytic degradation of congo red dye from aqueous environment using cobalt ferrite nanostructures: development, characterization, and photocatalytic performance. Water, Air, & Soil Pollution. 2020;231:1-16.

Chong MN, Zhu H, Jin B. Response surface optimization of photocatalytic process for degradation of Congo Red using H-titanate nanofiber catalyst. Chemical Engineering Journal. 2010;156(2):278-85.

Oladoye PO, Bamigboye MO, Ogunbiyi OD, Akano MT. Toxicity and decontamination strategies of Congo red dye. Groundwater for Sustainable Development. 2022;19:100844.

Akhtar A, Aslam Z, Asghar A, Bello MM, Raman AAA. Electrocoagulation of Congo Red dye-containing wastewater: Optimization of operational parameters and process mechanism. Journal of Environmental Chemical Engineering. 2020;8(5):104055.

Dehghani MH, Solangi NH, Mubarak NM, Rajamohan N, Bosua S, Othmani A, et al. MXene-based materials as adsorbents, photocatalysts, membranes and sensors for detection and removal of emerging and gaseous pollutants: A comprehensive review. Arabian Journal of Chemistry. 2024:106052.

Gulzar A, Haleem A, Rehman TU, Ullah M, Shah A, Ullah I. Harnessing the power of MXenes: a comprehensive exploration of their photocatalytic potential in mitigating hazardous dyes and CO2 reduction. Discover Materials. 2024;4(1):15.

Haddon RC. Carbon nanotubes. ACS Publications; 2002. p. 997-.

Haleem A, Ullah M, Shah A, Farooq M, Saeed T, Ullah I, et al. In-depth photocatalytic degradation mechanism of the extensively used dyes malachite green, methylene blue, Congo red, and rhodamine B via covalent organic framework-based photocatalysts. Water. 2024;16(11):1588.

Seling TR, Songsart-Power M, Shringi AK, Paudyal J, Yan F, Limbu TB. Ti3C2Tx MXene-Based Hybrid Photocatalysts in Organic Dye Degradation: A Review. Molecules. 2025;30(7):1463.

Panda S, Mehlawat S, Dhariwal N, Yadav P, Kumar V, Thakur O, et al. Investigation of Bi2MoO6/MXene nanostructured composites for photodegradation and advanced energy storage applications. Scientific Reports. 2024;14(1):27416.

Published

2025-04-30

How to Cite

Najafi Kalyani, F. (2025). Evaluation of the Effect of Conductive Nanoparticles MXene, ITO, and CNTs on Enhancing the Performance of a Three-Dimensional Electrochemical Reactor for Congo Red Dye Removal from Industrial Wastewater. International Journal of New Findings in Health and Educational Sciences (IJHES), 3(2), 39–52. https://doi.org/10.63053/ijhes.130

Issue

Section

Articles

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.